AB-Full Access II 5 GHz 微波设备

AB-Full Access ⅡTM微波通信设备，软件定义的无线设备，由室外单元和室内单元两部分组成。是一款占用频宽和传输速率可根据需求选择的微波通信产品，它使运营商在网络规划和网络建设时有很大的灵活性。AB-Full Access ⅡTM工作频率为5.25-5.35GHz的UNⅡ频段和5.7-5.8GHz的ISM频段，空中传输速率最高可达到210Mbps，最大的传输距离可达30公里。集成E1/T1和100M以太网口，最大限度地满足TDM和以太网口数据传输的需要。

ExcelFlex 6-38 GHz

The ExcelFlex™ is a full featured microwave radio for the global telecommunications market. It consists of a Software Defined Indoor Unit™ (SDIDU™) and Outdoor Unit (ODU). The ExcelFlex radios include a state-ofthe-art single chip modem ASIC, allowing a highly integrated IDU with flexible modulation for spectral efficiency and powerful Forward-Error-Correcting schemes. The ExcelFlex is designed to support flexible payload types and data rates, as well as payload switching, in 1+0 unprotected, 2+0 east/west, 1+1 protected, and 4+0 configurations.

Advanced capabilities: The Software Defined IDU includes an integrated Crosspoint Switch that allows a total of 160 E1s (200 T1s) to be mapped from and to any of three different ports: East Modem (maximum 64E1/84T1), West Modem (maximum 64E1/84T1), and Local Front Panel (maximum 32E1/32T1). The Crosspoint Switch gives systems integrators and network designers flexibility in designing ring and linear point-to-point-to-point architecture networks.

AB-MAX

AB-MAX consists of fixed broadband wireless access equipment (Access Point and CPE) for Internet, data, multimedia, video, voice, and other emerging IP based applications. Combining WiMAX with higher level network features, AB-MAX provides a robust, cost-effective alternative to wired alternatives such as T1/E1, DSL and cable modems.

ExcelMAX Access Point

The ExcelMAX Access Point is a Point to Multipoint (PMP) base station product designed to operate in the 3.3-3.8 GHz spectrum and supports 3 different Duplex architectures – Full Duplex FDD (Frequency Division Duplex), Half Duplex FDD, and TDD (Time Division Duplex). The WiMAX (802.16-2004) compliant Non Line of Site (NLOS) platform supports a strong suite of Quality of Service (QoS) features and multiple services, which allow a service provider to offer different Service Level Agreements (SLAs) to hundreds of residential, SoHo, MDU and SME users from a single Access Point location.

ExcelMAX Full Duplex FDD (FD-FDD) CPE 3210

Axxcelera’s ExcelMAX™ FD-FDD CPE3210 is a Point to Multipoint (PMP) CPE designed to operate in the 3.3-3.8 GHz spectrum and supports a Full Duplex FDD (Frequency Division Duplex) architecture. The WiMAX-2004 compliant CPE allows service providers to offer broadband wireless services to customers in Non Line of Site (NLOS) locations. The Full Duplex CPE 3210 allows carriers to offer excellent quality voice and video services to business and residential users. The ExcelMAX™ CPE3210 supports a strong suite of Quality of Service (QoS) features, including Committed Information Rate (CIR), Peak Information Rate (PIR), BE, nrtPS, rtPS, and UGS. The CPE supports Call Admission Control (CAC) features, which allows for scalable carrier class VoIP services and the IGMP protocol which supports Video Broadcast services. All CPEs in a service provider network are completely managable remotely by Axxcelera’s carrier-class Network Management System using SNMP protocol.

ExcelMAX Half Duplex FDD (HD-FDD)/TDD CPE 3310

Axxcelera’s ExcelMAX™ H-FDD/TDD CPE is a Point to Multipoint (PMP) CPE designed to operate in the 3.3-3.8 GHz spectrum and supports a Half Duplex FDD (Frequency Division Duplex) or a TDD (Time Division Duplex) architecture. The WiMAX-2004 compliant CPE allows service providers to offer broadband wireless services to customers in Non Line of Site (NLOS) locations. The ExcelMAX™ CPE 3310 supports a strong suite of Quality of Service (QoS) features, including Committed Information Rate (CIR), Peak Information Rate (PIR), BE, nrtPS, rtPS, and UGS. The CPE supports Call Admission Control (CAC) features, which allows for scalable carrier class VoIP services. All CPEs in a service provider network are completely manageable remotely by Axxcelera’s carrier-class Network Management System using SNMP protocol.

ExcelMAX Indoor CPE 3410

Axxcelera’s ExcelMAX™ Indoor CPE is a low cost, self-installable Point to Multipoint (PMP) CPE designed to operate in the 3.3-3.8 GHz spectrum and supports a Half Duplex FDD (Frequency Division Duplex) or a TDD (Time Division Duplex) architecture. The WiMAX-2004 compliant Indoor CPE allows service providers to offer broadband wireless services to customers in Non Line of Site (NLOS) locations. The ExcelMAX CPE 3400 supports a strong suite of Quality of Service (QoS) features, including Committed Information Rate (CIR), Peak Information Rate (PIR), BE, nrtPS, rtPS, and UGS. The CPE supports Call Admission Control (CAC) features, which allows for scalable carrier class VoIP services and the IGMP protocol which supports Video Broadcast services. All CPEs in a service provider network are completely managable remotely by Axxcelera’s carrier-class Network Management System using SNMP protocol.